Microtronics myDatalog4 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 145

Microtronics myDatalog4 Скачать руководство пользователя страница 14

Important note: The manufacturer's products that are designed for use outdoors include
extensive protection against penetrating moisture and dust.

4.4.1 Use of the hazard warnings

DANGER:

Indicates a potential or threatening hazardous situation that will result in death or serious

injuries if not avoided.

WARNING:

Indicates a potential or threatening hazardous situation that can result in death or serious

injuries if not avoided.

CAUTION:

Indicates a potential hazardous situation that can result in minor or moderate injury.

Note: Indicates a situation that does not result in any injury to persons.

Important note: Indicates a situation that can result in damages to this instrument if it is not
avoided. Information that must be particularly emphasised.

Note: Information that supplements the specifications in the main text.

4.4.2 General safety instructions

DANGER:

Always switch off all of the used power supplies for the device before installing it,

completing any maintenance work or resolving any faults.

WARNING:

Never use this device in areas where the use of radio equipment is prohibited. This device

must not be used in hospitals and/or in the vicinity of medical equipment, such as

pacemakers or hearing aids, as their functionality could be compromised by the GSM/GPRS
modem contained in the device.

4.4.3 Safety and preventative measures for handling GSM/GPRS modems

Observe the following safety and preventative measures during all phases of installation, operation,
maintenance or repair of a GSM/GPRS modem. The manufacturer shall not be held liable if the
customer disregards these preventative measures.

CAUTION:

The GSM/GPRS modem connection may not be used in hazardous environments.

No guarantee of any kind, whether implicit or explicit, is given by the manufacturer and its

suppliers for the use with high risk activities.

In addition to the following safety considerations, all directives of the country in which the device is
installed must be complied with.

14

Rev. 01

«
...
12
13
14
15
16
...
»

Содержание myDatalog4


















































































































































Отзывы:

Нет отзывов