Microsemi SyncSystem 4380A Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 90

background image

DOC 4380A

4380A O & M Manual

40

098-00723-000

– Jul 2017 Revision 4.0

SyncSystem 4380A O&M Manual

3.4.1.1 Real Time Data Port (1135)

Certain  applications  require  that  GPS  data  be  retrieved  in  a  timely  manner.    For  this  purpose,  Port  1135
may be configured to provide real-time data output.  Users can specify which logs are output and users may
request  any  of  the  ASCII  logs  specified  in  the  user  manual  for  the  Novatel  OEM6  receiver
(

http://www.novatel.com/support/info/documents/

). See the

log

command.

3.4.1.2 Command Port (1700)

System commands can be issued to the 4380A via the command port.  These commands provide a limited
set of operations to be used for remote control of the system.  Typically, a remote monitoring station may
record an error that indicates  user intervention is required.   The remote  monitoring  station  would then be
able to access the command port via the Ethernet and issue the commands required for recovering from the
error.  The following list provides a short description of each command.

Note:

All commands are in lowercase and the commands

are

case sensitive.

Command

Description

Basic Commands

help, h or ? <command>

Display help for a command or list all commands. Proper format is to
proceed the command with help, h, or ? help <command>

quit

Closes the command connection and terminates the telnet connection.

Status Commands

show

Shows the current system factory (config), user configuration (settings),
network (network), and system status (status) values. This command is
the equivalent of sending these 4 commands at the same time.

status

Shows the values of all runtime status variables

alarm

Shows the current alarm state

alarms

Shows active alarms

config

Shows unit configuration parameters

network

Show network interface configuration.

Note:

These settings do not

apply if the mode=DHCP.

syslog

Dump the system log file.

diag

Adjust diagnostic logging levels.

diag_port

Switch to the diagnostic port (1800).

ptdavg_port

Switches the command port display to port 2100 to view the average
measurement results.

ptdraw_port

Switches the command port display to port 2101 to view the raw
measurements every second.

status_port

Switch to the status port (1900)

Settings

settings

Shows the current user control/configuration settings.

diff

Displays any difference between the current system settings and the
saved user configuration file.

load

Restore system configuration settings from a file on the disk

save

Save current configuration settings to disk. save <filename>. Default =
<default>

list

List available user configuration files available on disk. If there are no
files listed the 4380A is using the factory default settings.

delete

Deletes specified user system configuration files.

Manual Time Setting
Commands

force time

Manually set the time and enable outputs when GPS is not available

adjust_time

Manually adjust the time in 1 second increments when in manual time
mode

«
...
46
47
48
49
50
...
»

Содержание SyncSystem 4380A



























































































Отзывы:

Нет отзывов

Похожие инструкции для SyncSystem 4380A

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 31

Бренд: Samsung Страницы: 15

Бренд: ICP DAS USA Страницы: 8

Бренд: Quantum Страницы: 20

Бренд: hilscher Страницы: 154

Бренд: Daedalon Страницы: 6

UniFi WiFi BaseStation XG

Бренд: Ubiquiti Страницы: 19

Emotron OSTO 100

Бренд: CG Страницы: 112

Бренд: 3Com Страницы: 53

Бренд: iNetVu Страницы: 20

Бренд: ADDON Страницы: 4

8-Port 10/100Mbps Fast Ethernet Switch

Бренд: Amer.com Страницы: 14

Бренд: Paradyne Страницы: 108

Бренд: AES Страницы: 44

PSJ-VZ58 gen3 OEM

Бренд: Grizzly Страницы: 12

Бренд: Trend Micro Страницы: 2

Бренд: ICP DAS USA Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды