Microsemi PDS-104G, Руководство пользователя, Страница: 37 / 48

PDS-104G PoE Switch
Power Over Ethernet PowerView Pro User Guide
Copyright © 2016 Microsemi Page 37 of 48
Rev. 1.0 CPG
– PoE BU
One Enterprise Aliso Viejo, CA 92656 USA
7
Upload/Download Unit Configuration over TFTP
The unit supports uploading / downloading unit configuration. Below are some typical usage examples:

Backup unit configuration for later use.

Configure one unit, and later upload same configuration for additional units

Modify unit configuration offline and later uploading it to one or more units.
NOTE:
1. Although the configuration file is text-based, please don't try to change it manually.
Such changes will be rejected (please see the message below).
2. For offline configuration changes please contact tech support at
poesupport@microsemi.com .
7.1 Upload Unit Configuration to TFTP Server
Use the following procedure to upload the unit configuration:
1. Activate and run IPv4 or IPv6 TFTP Server
2. Verify that the firewall on the computer running TFTP Server is off, or accepts incoming UDP traffic on
port #69.
3. Set TFTP Server root files folder (for example d:\config_files).
4. Enable TFTP Server to write incoming files to its local drive.
5. Open a Telnet/SSH session with the unit. Type username and password, and select the configuration
menu.
Figure
‎7-1: Upload Unit Configuration
6. Type the TFTP Server IPv4/IPv6 address, file name (for example param.txt), and press Enter to upload
the unit configuration file to TFTP Server root folder.