Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
17
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
3.3.2.2 IPv6 Network Configuration
Enable DHCPv6
Obtain IPv6 address from DHCPv6 Server
IPv6 Address
Static IPv6 address whenever DHCPv4 is off
IPv6 Prefix
Static IPv6 mask whenever DHCPv4 is off
IPv6 Default Gateway
Static IPv6 default gateway whenever DHCPv4 is off
3.3.2.3 Network Hostname/FQDN
Host name field is used both by DHCPv4 and DHCPv6 to register the unit name in DHCPv4/v6 Server, allowing
the IT manager to easily find which remote network device was given a specific IP address. Please note that
IPv6 uses the FQDN terminology as host name.
3.3.3 Network Services Configuration (IPv4/IPv6)
Figure 3-9: Network Services Configuration
DNS Server #1
DNS Server #2
Domain Name Server IPv4/IPv6 address. Please note that DNS fields will
become gray whenever DHCPv4 or DHCPv6 is enabled, expecting to get DNS
IP address from DHCPv4/v6 Server.
SysLog Server #1
SysLog Server #2
Network System Log IPv4/IPv6 Servers address used to log various unit log
message events, to be viewed later by the IT manager.
NTP Server
Network Time Protocol Server IPv4/IPv6 address required by
Automatic
Weekly Schedule PoE Port Activation
feature.
Time Zone Offset
Local time shift from GMT time in hours and minutes.
NOTE:
For valid NTP Server IP configuration, please make sure a green
(OK)
appears to the
right of Local Time label (Web page reload refresh may be required).