Panel Functions 77
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
Fig. 8.3.2.1.a Printhead mechanism opened
3.
Insert the consumable and set the paper guides to the paper width
(details can be found in section 4).
4.
Determine the position of the gaps/marks of your material.
5.
The following table gives you an
overview of media and sensor
target positions
:
Media
Sensors required
Position mark of the
lower sensor
Media with Black marks
Reflex sensor (Black mark)
(+ transparent sensor for
paper end detection)
Directly under the
black mark
Die-cut label
(When using labels with
recesses/ Notched tag the
die-cuts have to be centric
under the upper sensor)
Upper and lower sensor as
transparent sensor (Gap)
Directly under upper
sensor
Printhead
release levers
Printhead
Upper Sensor (fix) Lower Sensor (movable)
Transparent Sensor Reflex Sensor
(GAP) (Blackmark)
Cover (opened)
