Panel Functions 75
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
8.3.1. Adjusting the Printer to the Print Material (Paper Type)
For labels with transparent or register gaps please select the menu sub-point “Label (with
Gap)” (The printer uses the Gap Sensor = Transparent Photoelectric Switch.)
For materials with markings / Black Marks please select the menu sub-point “Reflex”. (The
Reflex Sensor is used.) For continuous media please select the menu sub-point “Continuous”.
Panel display
Notes
[Online ]
Turn the printer OFF LINE with this key.
[Menu Level 1 ]
. . .
Press the
or
key until [Paper Menu
] is
displayed.
[Paper Menu ]
Press this key. This selects the Paper menu.
[Paper Size ]
. . .
Press the
or
key until [Paper Type
] is
displayed.
[Paper Type ]
Press this key. This selects the Paper Type menu.
[Label (with Gap)]
The currently set value is displayed.
. . .
Press the
or
key until the statement
shown by the display corresponds to the inserted media
(Black Mark e.g.).
[Black Mark ]
The printer is adjusted to material with Black marks.
[Save as Setup? ]
[Online ]
In addition this new value can be saved as setup value
(using the
key), before the printer is turned ON
LINE again. After this decision turn the printer ON LINE
again: Press the
key
longer than 2 seconds.
