Micronova S.r.l.
-
Via A. Niedda, 3
-
35010 Vigonza (PD)
-
+39 049 8931563
-
+39 049 8931346
date 11/06/2016
page 15 of 83
Control board L023
Micronova
ENG
IN
S
T
A
L
L
A
T
IO
N
5.2 Starting your pellet stove
Once you are certain to have correctly followed the installation instructions, you can
start your pellet stove for the first time. This includes all of the parameter setting steps.
These can be set through the use of the buttons on the console or, more quickly and
more safely, through the use of a personal computer and the interface software, as well
as through the use of the programming system that can be provided by Micronova. By
using the automated testing system, this operation is completely automatic and included
in the various phases of the final test of the device.
6.
USER INTERFACE
Through the
console
you can have a dialogue with the control board simply by pressing
a few buttons. The display informs the operator on the working status of the stove. In
programming mode the various settings can be visualized and modified through the use
of the buttons.
Both the appearance of the display panel and the silk screen print are customizable by
the client.
The information available in the present manual refers to the control board equipped
with the programmable thermostat option.
5.
INSTALLATION
Install the circuit board inside the stove in such a position that will prohibit it from
exceeding the operational temperature specifically indicated. The cables and clips provided
are sufficient enough to guarantee the correct wiring of the connections to all the various
elements of the electrical circuit. Please refer to
figure 1
for more details.
5.1 Automated system test
Micronova provides an automated end
-
of
-
production
-
line testing system that allows
for the necessary verifications to assure the correct assembly of the circuit board and
the various external parts (probes, motors, etc.).
