4 of 17
All data can be subject to change without advanced notice. Version: December 6, 2018. © Micronel AG
2 Overview of U100HL-024KA-4
Position Designation
1
Pressure discharge nozzles, outlet, G 3/4 inches
2
Suction nozzles, inlet, G 3/4 inches
3
Mounting holes for horizontal mounting with M6 screws
4
Mounting holes for frontal mounting with M6 screws
5
Plug connector M16 DIN 8-pin
3
Basic Safety Information
WARNING
Risk of injury or product damage through improper handling.
Please carefully read and understand the operating manual before commissioning.
Danger from ejected parts!
Make sure that no foreign objects enter the fan. Make sure that media discharged into the
surrounding area are not discharged close to people.
Danger from ejected parts!
Do not insert any objects through the opening in the U100HL-024KA-4.
Danger from rotating and pressurized parts!
Before starting work on the U100HL-024KA-4:
- Disconnect from the power supply
- Secure against restarting,
- Determine absence of voltage,
- Vent pipes and pump (depressurization)
Work on electrical equipment must only be carried out by qualified and authorized
electricians!
CAUTION
Risk of injury!
Hair can be sucked in by the flow and become coiled around the impeller.
Hair should not be worn down and untied! Use a hair net!
Risk of cutting and crushing when reaching into the rotating impeller
Only operate the U100HL-024KA-4 with pipelines connected to suction or pressure
discharge nozzles! A pipe or hose section of at least 12 cm in length must also be connected
during operation with opened suction nozzles (suction from or discharge into the surrounding
1
4
2
5
3
