Microlife BP B6 Connect, Руководство пользователя

Страница: 7 / 99

5 BP B6 Connect EN
How do I evaluate my blood pressure?
The LED traffic light indicator on the left-hand side of the display
8
indicates within which range the measured blood pressure lies. The
value is either within the optimum (green), elevated (yellow) or high
(red) range. The classification corresponds to the following ranges
defined by international guidelines (ESH, ESC, JSH). Data in mmHg.
The higher value is the one that determines the evaluation.
Example: a blood pressure value of 140/80 mmHg or a value of
130/90 mmHg indicates «blood pressure too high».
Average Indicator «MyCheck»
This symbol
CT
indicates after each measurement, if the most
recent measured value lies below, above or on the same level as
your stored average value (see also chapter «5. Data Memory»).

If the measured Systole or Diastole is more than 5mmHg
higher than the stored average, the arrow shows upwards.

If the measured Systole or Diastole is more than 5mmHg
lower than the stored average, the arrow shows downwards.

If the measured Systole and Diastole do not differ by more
than 5mmHg from the stored average, the arrow shows
straight on.

If the measured systole and diastole differ in different direc-
tions from the stored average, this is indicated first with the
systole figure flashing, together with the up or down arrow
for two seconds. Thereafter, the diastole figure flashes with
the arrow pointing up or down for two seconds.
Appearance of the Pulse Arrhythmia (PAD)
This symbol
BL
indicates that certain pulse irregularities were
detected during the measurement. In this case, the result may
deviate from your normal blood pressure – repeat the measure-
ment. In most cases, this is no cause for concern. However, if the
symbol appears on a regular basis (e.g. several times a week with
measurements taken daily) we advise you to tell your doctor.
Please show your doctor the following explanation:

In MAM mode Atrial Fibrillation (AF) will also be checked:
follow the directions in chapter «1.».

If the symbol appears, select MAM mode and measure
again: see details in chapter «2.».
5. Data Memory
This device automatically stores up to 99 measurement values for
each of the 2 users.
Select either user 1 or 2 by pressing the user button
5
.
Viewing the average of the last 28 days
Press the M-button
3
briefly, when the device is switched off. The
display first shows « M »
BP
and « 28A », which stands for the
average of measurement values of the last 28 days.

Blood pressure readings with suboptimal cuff fit
BT
-A are
not considered in the average value.
Viewing the clinical blood pressure average «MyBP»
Pressing the M-button again, allows you to see the clinically rele-
vant blood pressure average «MyBP». The display first shows
« M »
BP
and «MyBP»
BQ
. This clinical blood pressure average is
only shown when 12 clinically relevant measurement values in the
last 28 days have been performed.

Only measurements that were performed in the morning
between 05:00-10:59 or in the evening between 17:00-
22:59 are considered.

A maximum of 4 readings per day are considered (2 from
the morning and 2 from the evening).

Measurements performed in standard mode and in MAM-
mode are considered in the average, when they have been
performed during the right time of the day.
Range Systolic Diastolic Recommendation
1. blood pressure
too high
≥ 135 ≥ 85 Seek medical
advice
2. blood pressure
elevated
130 - 134 80 - 84 Self-check
3. blood pressure
normal
<130 <80 Self-check
Information for the doctor on frequent appearance of the
Arrhythmia indicator
This device is an oscillometric blood pressure monitor that also
analyses pulse irregularity during measurement. The device is
clinically tested.
The arrhythmia symbol is displayed after the measurement, if
pulse irregularities occur during measurement. If the symbol
appears more frequently (e.g. several times per week on
measurements performed daily) we recommend the patient to
seek medical advice.
This device does not replace a cardiac examination, but serves
to detect pulse irregularities at an early stage.