Microgard 2500 PLUS PAPR, Инструкция по эксплуатации

Страница: 6 / 86

ENGLISH
3
3. Technical Specifications/Approvals
*EN Class specified by EN14325: 2004. The higher the class number the better the performance.
For detailed information on the test methods and a full list of chemicals tested please visit www.microgard.com or
e-mail technical@microgard.com
** Important note: static dissipative sock insert achieves Class 5 of 6 (
> 240 mins). Refer to “Model Information” (page 2) where the user is advised to wear
socks inside chemical protective wellington boots.
1 Discolouration of visor will occur after continuous exposure with concentrated Sulphuric Acid.
Fan Unit Air Flow Rate - Please refer to the respiratory device user instructions
Temperature Range - Service temperature: determined by the temperature range permitted by the respiratory device fan unit. Please refer to the
respiratory devices user instructions for details
MICROGARD
®
2500
MICROCHEM
®
3000
MICROCHEM
®
4000
Physical Performance
EN Class* EN Class* EN Class*
EN 530 Abrasion 2 of 6 3 of 6 6 of 6
EN ISO 7854 Flex Cracking 5 of 6 6 of 6 5 of 6
EN ISO 9073-4 Tear Resistancee 2 of 6 2 of 6 3 of 6
EN ISO 13934-1 Tensile Strength 3 of 6 2 of 6 2 of 6
EN 863 Puncture Resistance 2 of 6 2 of 6 2 of 6
EN ISO 13938-1 Burst Resistance 2 of 6 2 of 6 2 of 6
EN13274-4 Resistance to ignition réussi réussi réussi
EN 25978 Resistance to blocking Aucun blocage Aucun blocage Aucun blocage
EN 1149-1:1995 Electrostatic Properties (
surface resistance)
Pass (inside only) Pass (inside only) Pass (inside only)
EN ISO 6529 Chemical permeation testing results
(mean breakthrough time 1.0μg/cm 2 /min ** )
Test Method Chemical Result EN Class Result EN Class Result EN Class
EN ISO 6529 Sulphuric Acid 96 wt%
>
480mins 6 sur 6
>
480mins 6 sur 6
EN ISO 6529 Sodium Hydroxide 50 wt% > 480 6 sur 6
EN ISO 6529 Sodium Hydroxide 40 wt% > 480mins 6 sur 6 > 480mins 6 sur 6
EN 14126:2003 Fabric Barrier to Infective Agents Results
Test Method EN Class EN Class EN Class
ISO 16603 Class 6 of 6 Class 6 of 6 Class 6 of 6
ISO 16604 Class 6 of 6 Class 6 of 6 Class 6 of 6
EN ISO 22610 Class 6 of 6 Class 6 of 6 Class 6 of 6
ISO/DIS 22611 Class 3 of 3 Class 3 of 3 Class 3 of 3
ISO 22612 Class 3 of 3 Class 3 of 3 Class 3 of 3
Whole Suit Performance
Type 3: Jet Test EN14605: 2005 Pass Pass Pass
Type 4: Spray Test EN14605: 2005 Pass Pass Pass
Type 5: Particle Test
EN13982-1(&2):2004
Pass Pass Pass
Ljmn, 82/90 ≤ 30% and Ls, 8/10 ≤ 15%
Radioactive Particles EN 1073-2:2002
Class 3 of 3 Class 3 of 3 Class 3 of 3
Seam Strength EN ISO 13935-2 Class 4 of 6 Class 4 of 6 Class 4 of 6