MICRO-EPSILON scanCONTROL 29 50 Series Скачать руководство пользователя страница 8

Страница: 8 / 64

Page 8

Safety

scanCONTROL 29xx

Protect the cable against damage.

> Failure of the measuring device

Only plug in or disconnect attached devices when disconnected from the power supply.

1.3

Notes on CE Marking

The following apply to the scanCONTROL 29xx measuring system:

- EU directive 2014/30/EU
- EU directive 2011/65/EU

Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant appli-
cable harmonized European standards (EN). The measuring system is designed for use in industrial environ-

ments.
The EU Declaration of Conformity is available to the responsible authorities according to EU Directive,
article 10.

1.4

Intended Use

- The scanCONTROL 29xx measuring system is designed for use in industrial and laboratory areas.

- It is used for

Profile measurement

Length measurement

Quality monitoring and inspection of dimensions

- The sensor must only be operated within the limits specified in the technical data

, see 3.2.

- The sensor must be used in such a way that no persons are endangered or machines and other material

goods are damaged in the event of malfunction or total failure of the sensor.

- Take additional precautions for safety and damage prevention in case of safety-related applications.

Содержание scanCONTROL 29 50 Series

































































Результаты поиска

Содержание scanCONTROL 29 50 Series

Отзывы:

Бренды по названию

Популярные бренды

MICRO-EPSILON scanCONTROL 29 50 Series, Руководство по эксплуатации

Результаты поиска

Содержание scanCONTROL 29 50 Series

Отзывы:

Бренды по названию

Популярные бренды