manualshive.com logo in svg

MICRO-EPSILON scanCONTROL 29 50 Series, Руководство по эксплуатации

Поделиться
Скачать
MICRO-EPSILON scanCONTROL 29 50 Series Скачать руководство пользователя страница 7

Page 7

Safety

scanCONTROL 29xx

1. 

Safety

System operation assumes knowledge of the operating instructions.

1.1 

Symbols

The following symbols are used in these operating instructions.

Indicates a hazardous situation which, if not avoided, may result in minor or mode-
rate injury.

Indicates a situation that may result in property damage if not avoided.

Indicates a user action.

i

Indicates a tip for users.

Measure

Indicates hardware or a software button/menu.

1.2 

Warnings

Connect the power supply and the display-/output device according to the safety regulations for electrical 

equipment
> Risk of injury
> Damage to or destruction of the sensor
Avoid shocks and impacts to the sensor.

 

> Damage to or destruction of the sensor

The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor
Avoid continuous exposure to dust and spray on the sensor by appropriate methods such as blowing or us-
ing a protective housing.
> Damage to or destruction of the sensor
Do not touch the protective windows of the optics with the fingers. Wipe off any fingerprints immediately with 
pure alcohol and a clean cotton cloth with no streaks. 

Содержание scanCONTROL 29 50 Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды