Page 16
Initial Operation
IMS5x00
Intensity [%]
0
80
Range [%]
20
40
60
Intensity [%]
0
80
Range [%]
20
40
60
Evaluation starts with the highest peak, e.g. 3 out of 4 peaks
The number of peaks of the FFT signal that are used for evaluation in distance and thickness measurement are to be
determined separately, see Chap. Number of Peaks.
In the case of a target consisting of several transparent layers, the material must be assigned for each layer, see Chap.
Material Selection.
With distance measurements, the coating thickness can be calculated via signal processing, see operating instruc-
tions Chap. 7.3.
1) During a distance measurement on transparent objects, thickness peaks are displayed in addition to the distance
peaks, but the controller does not evaluate them.
i
This function is used if, before or between the useful peaks, a material has even smaller interfering peaks caused
by thin layers on the target. This function should be used with caution and should only be used by product spe-
cialists.
