Page 14
Initial Operation
IMS5x00
Messpeak Sorting
The selection of peak/peaks dictates which region in the signal is used for the distance or thickness measurement.
Switch to material selection by going to
Settings
>
Data recording
.
Switch to the chart type
FFT
.
Choose between
First peak
and
Highest peak
.
Controller IMC5400, IMC5600
Thickness
Distance
Layer 1
Peak 1
Peak 1
Peak 2
Layer 1
Peak A
1
The IMS5400-THxx evaluates one layer. The peak in the FFT
signal already corresponds to the thickness. It is not neces-
sary to decide between the first and highest peak.
Intensity [%]
0
80
Range [%]
20
40
60
The first peak is evaluated
1) During a distance measurement on transparent objects, thickness peaks are displayed in addition to the distance peaks, but the
controller does not evaluate them. For the sake of clarity, thickness peaks are marked with letters.
