MICRO-EPSILON colorCONTROL MFA-5, Инструкция по эксплуатации

Страница: 62 / 80

Page 62
Commands
colorCONTROL MFA-5
6.2.6 Baud Rate
6.2.6.1 Set Baud Rate
setbaudratexxxxxx
Command Description Received Example Note
setbaudratexxxxxx Set baud rate
Default: 57600
OK setbaudrate019200
Output format: OK
9600, 19200,
38400, 57600,
115200, 230400
Only applicable for
the colorCONTROL
MFA-5 <-> PC
connection
i
The baud rate between the colorCONTROL MFA-5 and MFA-5-M is 115200 and cannot be changed.
The baud rate between the colorCONTROL MFA-5 and the PC can be set individually.
6.2.7 Checkpoint Capture Example
Example: capture215 3 capture = start test
2
= test time -> 200 ms, MED
1 = sensitivity -> High, 9x9 color chip matrix
5 = sensor -> 5. Sensor
Space character
3
= MFA-5/-M number 3 -> 3. MFA-5 in series
A carriage return CR (0x0d) must be sent after every command.
Every received character string is terminated with CR
i
A space character must be sent between the command and the number of the colorCONTROL MFA-5.
If you use several colorCONTROL MFA-5, the command testcon must be sent before the test value
recording, see Chap. 6.2.1.1 .