manualshive.com logo in svg

MICRO-EPSILON colorCONTROL MFA-5, Инструкция по эксплуатации

Поделиться
Скачать
MICRO-EPSILON colorCONTROL MFA-5 Скачать руководство пользователя страница 7

Page 7

Safety

colorCONTROL MFA-5

1. 

Safety

The handling of the system assumes knowledge of the instruction manual. 

1.1 

Symbols Used

The following symbols are used in this instruction manual:

CAUTION

Indicates a hazardous situation which, if not avoided, may result in minor or moder-

ate injuries.

NOTICE

Indicates a situation which, if not avoided, may lead to property damage.

Indicates a user action.

i

Indicates a user tip.

1.2 

Warnings

Connect the power supply and the display / output device in accordance with the safety regulations for elec-

trical equipment. 

 

> Danger of injury

 

> Damage to or destruction of the sensor 

The power supply must not exceed the specified limits.

 

> Danger of injury

 

> Damage to or destruction of the sensor

Avoid shock and vibration to the sensor. 

 

> Damage to or destruction of the sensor

Never kink the fiber optics and do not bend tightly.

 

> Damage to or destruction of the fiber optics; partial failure of the sensor.

Protect the ends of the fiber optics from dirt and contamination (use protective caps).

 

> Failure of the testing device

CAUTION

NOTICE

Содержание colorCONTROL MFA-5

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды