10
©2022 Micro-Air Corp
March 21, 2022, revision 1.0
(6) System Power
Use the power button to turn the system on or off. Button is red for off and green for on.
(7) Operational Mode
Pressing the mode button changes the current operating mode depending on what is available in your
system. All possible modes are listed below. See the
Note: If you do not see a mode you should have then see section
Configure your Available Outputs
(8) Fan Speed
Pressing the fan button selects how the fan will operate in conjunction with the
Fans with green bars are manually always-on regardless of heating or cooling, with number of bars
indicating speed. Fan Auto turns the fan on and off with a cooling or heat pump cycle and operates as Fan
Off in all other operational modes.
(9) Settings
Pressing the settings button will change the screen to the settings screen to allow
additional configurations. See section
(10) Additional Status Tray
Various icons may be here to indicate active operations. This thermostat has no icons to display here.
(11) Outside Temperature
This is the temperature reading for your local area that is retrieved over the
thermostat’s
internet
connection and is part of the
information.
Fan Only
Cool Only
Heat Pump
Only
Furnace Only
Auto Cool/Furnace
Fan Low
Fan High
Fan Auto
Fan Off
Power
Settings
Auto Cool/Heat
Pump
