16
©2022 Micro-Air Corp
March 21, 2022, revision 1.0
Bluetooth (Account) Password Reset
This screen is used to reset the saved Bluetooth password in the thermostat. This is the
password that must match your EasyTouch RV app account to make remote connections.
Only one account can have access to the thermostat. Use this whenever you reset the
password to your app account to regain remote access to the thermostat.
Temperature Reading Adjustment
This setting allows you to calibrate the Inside temperature reading with an offset. For
example, if the inside temperature reads 72°F (22.2°C) and you feel it is 75°F (24°C), you
can use the up and down arrows on this page to increment the offset to +3°F (+1.8°C).
Temperature Gap (Hysteresis)
This setting determines the difference in temperature required between setpoint and
inside temperature before a heating or cooling cycle will begin. This is helpful to prevent
short cycling in large spaces or spaces with high thermal loss, by running a cycle for longer
amounts of time. This offset is applied to all logic that involves setpoint operations, such
as auto modes, auto gas changeover, etc. See
Inside
Temperature (
°
F)
Heating
Setpoint (
°
F)
Heating Gap
Setting (
°
F)
System Operation
69
68
3
None
66
None
65
Heating Cycle Begins
67
Heating Cycle Continues
69
Heating Cycle Terminates
Table 12 - Temperature Gap Operational Example
Measurement Units
This setting determines how to display temperatures on the thermostat. Tap the Units
button to toggle between Fahrenheit and Celsius.
Touchscreen Calibration
EasyTouch RV is calibrated at the factory to accurately interpret your touch presses to be
where you are actually pressing the touchscreen. Pressing the Touchscreen Calibrate
Button will allow you to recalibrate the touch press area. Follow the on-screen prompts
to calibrate the touchscreen. Any overlapping test targets is a good calibration.
Restart
This setting will turn the thermostat off then on as if removing and restoring power. Tap
the Restart button and follow the on-screen prompts to confirm.
Reset All
This setting will reset certain settings in the thermostat back to factory defaults. Some
thermostats offer options to which settings to return to defaults. Tap the Reset All button
and follow the on-screen prompts to choose what you would like to reset.
Bluetooth Password
Reset
Temperature Gap
Button
Temperature
Reading Adjustment
Units Button
Touchscreen
Calibrate Button
Restart Button
Reset All Button
