background image

20 

©2022 Micro-Air Corp 

 

March 21, 2022, revision 1.0 

Smart-Device Application Features 

Restart Thermostat 

 

This Bluetooth only feature allows resetting the display just as if you removed and restored power. 

Calibrate Touchscreen 

 

It is normally not necessary to recalibrate the touchscreen. This selection prompts  the user to 

press the four corners of the display then test the calibration using three diagonal marks. This feature is 
only available from Bluetooth as being at the thermostat is required. 

Check for Updates 

 

Checks to see if any updates are available for the thermostat. The smart device application must 

have internet and the thermostat must be connected to Wi-Fi with a green Wi-Fi symbol. Tap Check for 
Updates and follow the prompts. 

Notifications 

 

Notifications provide a way for the user to monitor the temperature in the space using notification 

limits. Limits are set by connecting to the thermostat in the app, selecting the settings gear, and then 
selecting notifications. A minimum and maximum allowed temperature can be set.  Table 13 shows an 
example of operation with an 80°F maximum temperature set. Notification will be sent for each degree it 
rises  above  the  maximum  temperature.  If  temperature  drops,  no  notification  will  be  sent  unless  the 
temperature exceeds the last maximum temperature again (82 in the example). If the temperature drops 
two degrees below the set maximum, (78 in the example) it will again alert for each degree above the set 
maximum. This behavior helps avoid nuisance notifications to your smart device. 

 

 

 

 

 

 

Edit Wi-Fi Settings or Connect to Wi-Fi 

 

This is where you will make the connection from the thermostat to the internet. See section 

Connecting to a New Wi-Fi Network

 for details on how to use this feature. The app must be connected 

from Bluetooth to see this option.

Temperature (°F)

 

Action

 

80 

Send first notification 

81 

Send another notification 

82 

Send another notification 

81…79

 

Temperature drops, no 

notification 

78 

Max temp resets 

 

 

Table 13 - Push Notifications Operation Example 

Содержание ASY-356-X01
























Отзывы: