www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
64/76
7. Community Read-Only : public
Enter the name of the read-only community (by default = public)
31 characters maximum
8. Community Read/Write : public
Enter the name of the read/write community. This name is used by the UM-Clients to subscribe to the table of
notified Clients. It is recommended to personalise this name.
Value by default “public”.
31 characters maximum
9. HTTP Login Username : MGEUPS
Text field limited to 10
characters. Enables secure access to the sections of the Configuration menu. Default
value “MGEUPS”.
a. Manager Password : *
Text field limited to 10 characters
.
Enables secure access to the sections of the Configuration menu. Default
value “MGEUPS”.
b. BOOTP/DHCP Enabled : Enabled
Authorises the configuration of network parameters with your BootP/DHCP as a startup mode (choose enable).
Card operating mode with the server: after all reboots, the card (if this option is enabled), attempts to recover
the network parameters from the server for 10 seconds. If no response is obtained from the server, the card
boots with the last parameters saved from the previous start.
0. Return to previous menu
Goes back to the previous menu.
