www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
16/76
“Communication”
: indicates the status of the communication between the card and the UPS
“Power source”
: indicates whether the power comes from the utility or from the UPS battery
“Batteries”
: indicates whether the battery is being charged or discharged
“Output load level”
: indicates the power percentage used at UPS output
“Master output”
: indicates if the UPS output is protected
“Controlled outlets”
: indicates if the controlled outlets (if available) are powered.
3.2.1.3 “Battery status” zone:
◗
“Bargraph”:
Graph showing the remaining battery charge (in percent).
◗
“Battery charge level”
: Remaining battery charge (in percent).
◗
“Remaining backup time”
: Estimation of the maximum backup time remaining before UPS shutdown.
This time can be modified by the adjustments on the “Shutdown parameters” page
◗
“Last periodical test”:
Result of the last automatic battery test carried out by the UPS
Possible values are:
-
OK
: the test was completed correctly
–
NOK
: the battery needs to be checked
–
Deactivated
: the automatic battery test is not validated on the UPS