www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card
– User Manual
34003676EN/BB
Page
25/76
3.3 Logs
3.3.1 Measurements
Click on the
“Measurements”
section in the menu
.
The following measurements are saved and time-stamped:
◗
“Input voltage”
: Value of the utility voltage supplying your UPS (average of 3 phases for UPS' equipped
with a 3-phase input)
◗
“Input frequency”
: Value of the utility frequency feeding your UPS
◗
“Output voltage”:
Value of the output voltage of your UPS (average of the 3 phases for UPS’ with a 3-
phase output)
◗
“Output load”
: Value of the percentage of load at UPS output (Value of the most loaded phase for 3-phase
UPS’)
◗
“Battery capacity”:
Percentage of charge available in the battery
◗
“Remaining time”
: Estimation of the remaining backup time
◗
The save frequency of these values is defined in the
“System”
page (60 seconds by default).
Approximately 1000 time-stamps are stored permanently on the card. The oldest time-stamps are
automatically deleted.
◗
“Save”
enables all saved values to be opened or saved in CSV format (compatible with Excel type
spreadsheets)
“Clear”
enables deletion of all records. The administrator must enter his login / password to validate this
action if he has not already done so during the current session.
