61
FAULT CORRECTION
If treated properly, your wheelchair
will not malfunction. In order to pre-
serve your pleasure in driving the fol-
lowing table with a list of possible
malfunctions and their elimination
will help (especially if this is your first
electric wheelchair).
☞
Note:
Further malfunctions view opera-
ting manual <
Operating module
>,
section entitled <
Fault correction
>.
We recommend that an inspection is
carried out every year to permit the
early recognition and clearance of
faults which are not listed in the ta-
ble. The following inspection certifi-
cates should then be stamped by your
specialist dealer.
!
Attention:
Work on the internal mechanics of
the joystick and electronic parts
should only be carried out by a spe-
cialist workshop.
The mechanics of the joystick should
never be oiled but completely re-
placed!
Fault indications on the LED
display
In the event of a fault, an error indi-
cation will appear on the LED display.
The error codes help the specialist
workshop to quickly identify the cau-
se of the malfunction.
After initiation of the operating mo-
dule the electronic runs through a self-
test.
Do not move the joystick out of the
zero position during the self-test. –
Should the joystick have been moved
during the self-test, switch he
wheelchair on and off again.
