27
30
31
Depth adjustment of the foot-
board
The depth adjustment of the foot-
board is done by repositioning the
removable distancer pieces (fig. 30/
➀
).
– Lift up the footboard slightly on
the left side (fig. 30).
– Reposition the desired amount of
distancer pieces on the left side (fig.
30/
➁
).
– Pull of the distancer pieces that are
to be repositioned from the out-
side off of the retaining rod on the
right side of the footboard (fig. 31/
➂
).
☞
Note:
In certain angle settings of the foot-
board it is possible that a removal
or placing of certain distancer pi-
eces is not possible. In this case loo-
sen the clamping screws for the
angle adjustment (fig. 31/
➃
) and
change the position of the foot-
board so that a removal or placing
of the distancer pieces is possible.
Afterwards retighten the clamping
screws.
– Repositioning the footboard.
– Insert the distancer pieces as far as
possible onto the right retaining
rod again (fig. 31/
➂
).
– Swivel the footboard down and
hang it into place.
1
2
3
4
