32
PUSH HANDLES
The height adjustable push handles
code 502 (fig. 39/
➀
) are attached to
the backrest with a clamping jig each
(fig. 40/ /
➁
) and can be adjusted to
the requirements of the attendant.
The push handles are about 30 cm step-
lessly height adjustable, turnable in
steps of 30° and secured against being
pulled out.
☞
Note:
Further varieties of push handles
are optionally available at you spe-
cialist dealer.
Height adjustment of the push
handles
– Loosen the clamping screws with
the clamping levers (fig. 40/
➂
) so
far that the respective push handle
can be adjusted into the desired
position.
– Lift the push handle to the desired
height.
– Retighten the clamping screws with
the clamping levers (fig. 40/
➂
).
40
39
1
3
2
☞
Note:
The clamping lever (fig. 40/
➂
) can
be turned into an operation positi-
on that is comfortable for you.
– Pull the handle off so far that the
tooth work is released and turn it
to the desired position.
