47
Mounting
1. Insert the dispersion disc into the
lamp housing (fig. 74) and press
until the spring lock audibly engag-
es.
☞
Check for the correct position of the
circumferential gasket (fig. 75/ A).
2. Tighten the attachment screw of
the dispersion disc (fig. 76/
➂
).
3. First insert the taillight into the
rear panel, and then screw on the
clasp with the attachment screws
(fig. 77/
➁
).
4. Connect the plugged connections
of the electrical connections for the
taillights and mount the rear pan-
el and seat.
☞
Therefore observe chapter <
disas-
sembling the scooter into its com-
ponents- removing the batteries
>
in reverse order.
74
75
76
3
77
A
2
2
