manualshive.com logo in svg

Meyra 1.363, Руководство по эксплуатации

Поделиться
Скачать
Meyra 1.363 Скачать руководство пользователя страница 22

22

1

Braking to a standstill

Dosed braking

Guide the acceleration lever according
to the desired braking back into its
initial position.

Emergency braking

Let the acceleration lever spring back
into the zero-position. – The 

SCOOT-

ER

brakes down at shortest distance.

The vehicle has a braking distance of
approx. 1 metre at 6 km/h and approx-
imately 2.0 metres at 10 km/h! Take
into account that the braking distance
can change depending on the condi-
tion of the tyres, the total weight of
the 

SCOOTER

 and the driving surface

condition.

Left/right turns

Use the handlebars to turn the steer-
ing column left/right according to the
desired turn radius.

Reduce the speed when turning.

Caution:

Danger of tilting when reversing.
Especially on slopes and inclina-
tions!

Accelerator lever

The driving speed is determined while
driving by the movement of the ac-
celeration lever (fig. 22/ 

➀

).

As soon as the acceleration lever is
moved the 

SCOOTER

, depending on

the adjustment maximum final speed,
starts driving fast or slow.

☞

Note:

Only move the acceleration lever
out of the zero-position after the
self-test of the electronic has been
completed!
– The LED of the pre-selected max-
imum speed will light up.

Driving speed

Move one side of the acceleration le-
ver (fig. 22/ 

➀

) forward until the de-

sired driving speed is reached.

Direction of travel

The driving direction is determined
with the respective operation of the
accelerator lever to the right (

F = for-

ward

) or left (

R = backwards

).

☞

Note:

☞

The speed is reduced automatical-
ly during the rearward travel.

22

1

Содержание 1.363





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды