32
49
51
Adjusting the seat height
The locking screw (fig. 49/
➀
) of the
seat pillar must be removed to adjust
the seat height. The locking screw must
be fitted again after the positioning
of the seat pillar (fig. 49/
➀
).
Arm support
Caution:
Do not carry the seat on the arm
supports.
Swivelling up the arm support
The arm support can be swivelled up
for an easier transfer to/from the seat
(fig. 50).
Adjusting the angle of the arm
support
The angle of the arm support can be
steplessly adjusted by adjusting the
stopper screw (fig. 51/
➁
).
☞
Therefore loosen the counter nut
(fig. 51/
➂
) first. After the angle
adjustment retighten the counter
nut.
Adjusting the height of the arm
supports
The height of the arm support can be
steplessly adjusted after loosening the
clamping screw (fig. 52/
➃
).
☞
Maximally lift the arm support up-
ward up to the marker.
☞
After the height adjustment
retighten the clamping screw.
50
1
52
3
2
4
