46
70
71
72
Rear light
The taillight (fig. 70/ ) ha to be re-
moved before the rear turning signal
can be replaced.
☞
Note:
For this we recommend to contact
a specialist workshop.
Removal
1. Switch off the
SCOOTER
.
2. Remove the seat and rear panel and
disconnect the plugged connec-
tions of the electrical connection
for the taillights.
☞
Therefore view chapter <
disassem-
bling the scooter into its compo-
nents- removing the batteries
>.
3. Unscrew the attachment screws of
the clasp (fig. 71/
➁
) and remove
the taillight (fig. 72).
4. Unscrew the attachment screw of
the dispersion disc (fig. 72/
➂
).
5. Press down the spring lock with a
small screwdriver (fig. 73) and pull
out the dispersion disc toward the
front.
1
73
3
2
2
