27
30
31
32
1
Removing the batteries
1. Switch off the
SCOOTER
and pull
out the drive key.
2. Remove the seat (fig. 27). – For this
activate the locking lever (fig. 26/
➀
).
3. The ball grip of the selection lever
has to be screwed off before remov-
ing the rear panelling is removed
(fig. 30).
☞
In order to prevent loosing the ball
grip it should be replaced after the
rear panel has been removed.
4. Lift the rear panel (fig. 31). – By
careful lifting of the rear panel the
corresponding velcro straps are
opened.
5. Separate the plugged connections
of the following electrical connec-
tions:
☞
Rear lights connection (fig. 32/
➀
).
– Store the rear panel protected
and secure.
