Meyra 1.163, Руководство по обслуживанию

Страница: 76 / 80

76
ERROR CODE DISPLAY
The following error code list is valid for all Scooter models with LCD-operating panel (item-
no. 1062101)
Error display Cause of error Measure
E01 not used
E02 Motor (interruption) Check motor cables, check motor
E03 Motor (short circuit) Check motor cables, check motor
E04 valid from
2008-07 in
combination
with S-Drive
electronic Micro switch magnet-
ic brake Scooter in push mode, engage magnetic
brake; check pushing switch/magnetic
brake
E05 not used
E06 Inhibit active/ charg-
ing lock Check charging socket, replace charging
socket
E07 Director error Director error between operating panel
and the Solo-electronic; check cable;
replace Solo-electronic
E08 Controller-error (Solo
/ S-Drive) Replace Solo / S-Drive electronic
valid up to
2008-06 in
combination
with Solo
electronic Error in the magnetic
brake or pushing
switch Scooter in push mode, engage magnetic
brake; check pushing switch/magnetic
brake
valid from
2008-07 in
combination
with S-Drive
electronic Error in the magnetic
brake Check magnetic brake, plugged connec-
tion
E09 not used
E10 not used
E11 Director error Check per „On-Board-programming“:
Selection of the correct director (lever,
hand gas, foot pedal gas), zero zone and
adjustment range. Interruption of the
director; check cables.