Meyra 1.163, Руководство по обслуживанию

Страница: 57 / 80

57
Programming sequence
After the plug of the programming unit is inserted
into the programming socket of the vehicle
and
the vehicle has been switched on, the display indi-
cates the description of the programming unit and
the software version (e. g. SP1 2.0).
Afterwards the display switches to the first driving
parameter <
Forward acceleration >.
Selecting the driving parameters
Select the desired driving parameter that is to be
amended by pressing the
< up- > or < down-key >.
After pressing the < Enter-key > the current set val-
ue for the selected driving parameter is shown in
the display.
Changing the value of the driving param-
eter
Adjust the driving parameter to the desired value
by pressing the
< up - > or down -key >.
By pressing the < Enter-key the adjusted value is
stored.
By pressing the
< down -key > the next driving pa-
rameter is selected, by pressing the < up -key > the
previous one.
☞
Note:
All parameters that adjust the acceleration, de-
celeration and the maximum speed are separat-
ed into the sectors
fast and slow . On the vehicle
only the settings made under fast are applied.
Nevertheless for safety reasons the values set un-
der
fast must also be entered in slow , so that the
driving behaviour of the vehicle does not sud-
denly change with an installation amendment
of the
electronic.