Meyra 1.163, Руководство по обслуживанию

Страница: 34 / 80

1
2
2
3
3
3
3
34
Adjusting the straight forward course
(parallelity of front to rear wheels)
(all models)
1. Fold the tiller down, align it to the center of
the rear drive wheels and fasten it (e.g. with
straps).
Adjusting the alignment
☞
Note:
During the adjustment watch for the thread
symmetry, meaning the visible thread must be
of the same length on both sides of the tie rod.
Model 3.264,
Model 1.363 / 1.364 and
Model 2.363 / 2.364
2. Loosen the counter nut (1) of the front tie rod.
3. Turn the tie rod until the correct toe-in of the
right hand steering wheel is achieved, (view
chapter <
checking the alignment > ) .
4. Retighten the counter nuts (1).
5. Loosen the counter nut (2) of the rear tie rod.
6. Turn the tie rod until the correct toe-in of the
left hand steering wheel is achieved, (view chap-
ter <
checking the alignment > ) .
7. Retighten the counter nuts (2).
Model 2.663 / 2.664 and
Model 2.563 / 2.564:
2. Loosen the counter nuts (3) of the tie rod.
3. Turn the tie rod until the correct toe-in is achieved,
(view chapter < checking the alignment > ) .
4. Retighten the counter nuts (3).