Meyra 1.163, Руководство по обслуживанию

Страница: 33 / 80

2
1
33
ALIGNMENT
(only 4-wheel-models)
Checking the alignment
(all models)
1. Load the vehicle with about 50 kg on the foot
floorboard.
2. Adjust the tiller to a straight forward course.
3. Hold the alignment measure (1) between the
front rim horns (2) and adjust so that the ends
barely tough the rim horns.
4. Hold the wheel alignment measure between the
rear rim horns.
The wheel alignment is correct when the rear rim
horns are 2mm further apart than the front ones (2
mm toe-in).
☞
Note:
As a replacement for the wheel alignment meas-
ure you can also use two boards of about 30 cm
length:
1.) Hold the boards parallel beside each other
so that the end of one of the boards sits on the
front rim horn of the left wheel and the end of
the other board on the front rim horn of the
right wheel.
2.) Draw a continuous line above the boards.
3.) Hold the boards in the same fashion onto the
rear rim horns. – At the correct setting the two
marks must have a 2 mm distance.