Meyer Sound RMS 4.5, Руководство пользователя

Страница: 49 / 64

45
CHAPTER 4
Text View
Text View (Figure 4.9) is the most complete monitoring view
in RMS, with a host of important data displayed using text
fields.
Figure 4.9. Text View for the MILO loudspeaker
Text View will vary the most among types of loudspeakers,
and you may see other parameters (such as attenuation) in
addition to the inherent differences in the number of chan-
nels between loudspeakers.
Using Figure 4.9 as a guideline, Table 4.3 explains all of the
monitoring capabilities available in Text View for the MILO
loudspeaker.
Table 4.3 Monitoring Parameters in Text View for the MILO
Loudspeaker
Parameter Function
Title Bar Displays the Speaker Title and/or Device Name
Amplifier Peak
Power For each channel,
Wpk
is the peak power output
for the amplifier channel
Amplifier
Temperature Upper and lower heat sink temperature of the
amplifier
Amplifier
Limiting For each channel, Limit is the percentage of
limiting on the loudspeaker’s respective amplifier
channels
Primary Fan
Speed Fan speed of the amplifier’s primary cooling fan
Reserve Fan
Status Indicates whether or not the Reserve Fan is on
Loudspeaker
Communication Green: Loudspeaker online
Red: Information is not being received from the
loudspeaker (offline)
Service Pin Pressing the Service Pin on the amplifier user
panel displays “service pin” in this field and a
cartoon face on the loudspeaker’s views. This is
the reverse of the Wink function.
Fault Indicates various faults and abnormal conditions
Mute Red: Muted
Gray: Muting Disabled/Not Muted
Green: Muting Enabled/Not Muted
Wink Green: Winked
Gray: Not Winked
Solo Yellow: Soloed
Gray: Not Soloed
DC Supply
Headroom Should be over 17 VDC if AC mains voltage is
sufficient
Input Polarity Position of the loudspeaker’s Input Polarity
Switch:
+2: Polarity Switch set to Pin 2 Hot
+3: Polarity Switch set to Pin 3 Hot
Input Voltage
Vpk
within 0-10 V
Amplifier
Voltage For each channel, Peak ( Vpk ) and Average ( Vave )
voltage, within 0-100 V