Meyer Sound RMS 4.5, Руководство пользователя

Страница: 39 / 64

35
CHAPTER 3
Configuring the LonWorks Interface
The LonWorks Interfaces program on your computer keeps
track of the i.LON 10 adapters you specify. The interface
manages the connection between your computer and the
i.LON 10(s) on your RMS network.
NOTE: RMS software installation, covered in
detail earlier in this chapter, is required from
this point forward.
1. From the Start menu, click Control Panel , then
LonWorks Interfaces . The LonWorks Interfaces dialog
appears.
2. Click the Properties button. In the Properties dialog,
enter in the exact hostname as you did in the i.LON 10
that you configured in the last section (ilon-1).
3. Click the Address/Port tab, then check the
Use Static
IP Address
radio button. Enter the exact IP address
you used in the i.LON 10 that you configured in the last
section (for example, ilon-1 and 192.168.1.101).
To configure additional i.LON 10s, repeat steps 1 through 3
in this section for each i.LON 10 in the network.
4. Click OK to close the Properties dialog, then click Close
to exit the LonWorks Interfaces applet.