Meyer Burger BS 820, Руководство пользователя

Страница: 18 / 89

18 10002683-en-00 BS 820 - Safety
3.5.5 Setup
The setup work may be done only by personnel authorised and fully trained by MB or
by an MB service engineer.
3.5.6 Maintenance and inspection
The maintenance personnel must be specially trained for the wider field of responsibility.
Note: Stipulated deadlines, or those given in the operating manual,
for recurrent checks/inspections are to be complied with!
Workshop equipment appropriate to the task is absolutely necessary for carrying out
the maintenance work.
Note: MB cannot be held liable for possible consequences or damage to individuals and
machines if the safety regulations are not complied with.
Note: Only the maintenance personnel has access to the main switch padlock.
3.5.7 Decommissioning
Decommissioning of machines can only be done by personnel authorised and fully trained
by MB or by an MB service engineer.
3.6 Personnel selection and qualification; principal duties
3.6.1 Training
Only trained or instructed personnel is to be employed.
It is the responsibility of the user or the operator to ensure that tasked personnel is trained
and instructed in accordance with the requirements.
We offer internal and external courses tailored to your needs for your safety.
3.6.2 Working on electrical equipment
Work on the machine’s electrical equipment may be carried out only
by a trained electrician or by persons instructed to work under the guidance and supervi-
sion of a trained electrician in accordance with the electrical regulations.