62
The TV set will normally detect the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically.
If this automatic selection does not provide satis-
factory results (which should happen only rarely),
you can select the colour standard manually for
each programme position.
The colour standard is set in the factory to "Auto-
matic".
Setting the colour standard
• Press the "
MENU
" key to open the TV menu.
• Press the white key
to open the station table.
• Press the
F2
key to enable
editing of the station table.
• Use the cursor control key to
select the programme posi-
tion whose colour standard
you wish to change.
• Press the cursor control key
to move to the left
column.
• Use the corresponding
numeric key (in the exam-
ple:
) to select
"Colour standard".
• Use the
- +
key to select the desired colour stan-
dard, or to step through the available colour
standards until the picture is displayed clearly.
• Press the "
OK
" key to confirm your selection.
• Press the "
EXIT
" key to close the TV menu.
Opening the menu
22.1 Setting Stations
Colour standard for analogue stations
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
F2
EXIT
OK
Colour standard SECAM
Sound corrections
Colour standard
3)7)
Picture quality
Picture correct.
Enter logo
Station contained in EPG
Signal quality
5)
DVB-prog. info
5)
Frequency/channel
7)
0010
Hessen 3
0009
Südwest
0008
MDR
0007
PRO 7
0006
RTL 2
0005
RTL
0004
SAT 1
0003
Bayern 3
0002
ZDF
0001
ARD
Station table
Change with
Accept value with
– +
OK
✗
F1
➔
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 62
Downloaded From TV-Manual.com Manuals