Metrotech MetroMark i5000 Series Скачать руководство пользователя страница 60

Страница: 60 / 62

| i5000™ MetroMark™ Manual

Doc. No.:

R12015

TRANSMITTER

PART NUMBER

Conductive Attachment

R11156

Li-Ion Battery pack

R11636

7.5 Service Center Information

If the equipment does not function properly, replace the batteries as described above. If the equipment still mal

functions, contact one of the Metrotech Customer Service departments:

Metrotech West Coast Service

Center

Metrotech East Coast Service

Center

European Service Center

3251 Olcott Street

Santa Clara, CA 95054

Tel: 1-800-638-7682

(International: 1-408-734-1400)

Fax: 1-408-734-1415

Email: [email protected]

Internet: www.metrotech.com

5211 Linbar Drive, Suite 503

Nashville, TN 37211

Tel: 1-800-624-6210

TN: 1-615-366-7323

Fax: 1-615-360-9855

Email: [email protected]

SebaKMT

Dr.-Herbert-Iann-Str. 6

D-96148 Baunach, Germany

Tel: +49-9544-680

Fax: +49-9544-2273

Email: [email protected]

Or call the Metrotech headquarters for the nearest authorized Metrotech repair station.

Metrotech also manufactures and distributes these instruments: Pipe and Cable Locators, Ferromagnetic Loca

tors, Fiber Optic Cable Locating System, Sheath Fault Locators, Electronics Marker Locators, Acoustic Water

Leak Detectors, Water Leak Sound Correlators and Data Loggers.

For more details, see our website www.metrotech.com.

7.6 Warranty

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF

MERCHANTABILITY, BEYOND THOSE STATED HEREIN.

Metrotech warrants its equipment to be free from defects in workmanship and material under normal and proper

use and service for one year from date of purchase by original user. Metrotech assumes no obligation to repair

or replace equipment which has been altered or repaired by other than a Metrotech-approved procedure, been

subject to misuse, misapplication, improper maintenance, negligence, or accident; has had its serial number or

any part thereof altered, defaced or removed; or been used with parts other than those approved by Metrotech.

Warranty does not include batteries. Expendable items such as fuses and lamps are excluded.

Any detection product proved defective under this warranty will be repaired or replaced free of charge at the

Metrotech Corporation factory or approved Metrotech repair station. The equipment should be returned to our

factory by prepaid transportation after requesting and receiving return authorization from our Customer Service

Department. Metrotech’s obligations are limited to repair or replacement of broken or defective parts which have

not been abused, misused, altered, or accidentally damaged, or at the option of Metrotech, to refund of the pur

chase price. Metrotech assumes no liability for removal or installation costs, consequential damages, or contin

gent expenses of any other nature.

7.7 Copyright Notice

The information contained in this document is for informational purposes only and is subject to change without

notice. Metrotech Corporation makes no warranty of any kind with regard to the information contained in this

manual, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

Metrotech shall not be liable for errors contained herein, nor for incidental or consequential damages from the

furnishing of this information.

This manual contains proprietary information that is protected by copyright. All rights are reserved. No part of

this manual may be photocopied, reproduced, magnetically or electronically stored, transmitted, or translated into

another language without the prior written consent of Metrotech Corporation.

Bluetooth® is a registered trademark of Bluetooth SIG Inc.

P/N R11963

Содержание MetroMark i5000 Series






























































Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Metrotech MetroMark i5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды