Metrotech MetroMark i5000 Series Скачать руководство пользователя страница 53

Страница: 53 / 62

Metrotech Corp. |

Doc. No.:

R12015

Figure 6-44 Tickets Selection in Data Logging Menu

6.2.6.1.1

Create Ticket

generates a new ticket on the receiver. A notification that a new ticket is being created appears on

the screen for a few moments. Then, the screen returns to the Data Logging Tickets window. New tickets created

on the receiver will be viewed as SNXXXX_TEMP tickets in MyLocator. These temporary tickets can be renamed

once in MyLocator to better distinguish the data information from other locates.

Press the <Select> softkey to create a new ticket on the receiver.

Figure 6-45 Create Ticket Selection in Data Logging Menu

6.2.6.1.2

List Tickets

All the tickets in memory will be listed along with the menu option - Information / Activate / Close / Enter

Response.

To view a list of all tickets created, use the 4-way navigation button to move up and down the ticket list. Use the

4-way navigation button to move right and highlight the desired information. Press the <Select> softkey to open

the ticket. Press the <Back> softkey to return to the previous interface.

Содержание MetroMark i5000 Series






























































Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Metrotech MetroMark i5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды