Metrotech MetroMark i5000 Series Скачать руководство пользователя страница 33

Страница: 33 / 62

Metrotech Corp. |

Doc. No.:

R12015

5.5 Battery

Various battery types are available for operation. Depending upon use, an operator can expect typical battery

performance in continuous operation as follows. Operating the i5000 MetroMark consumes greater battery use

compared to line locating.

Battery Type

Battery Life

Li-ion

Up to 30 hours

Alkaline (9 AA)

Up to 20 hours

Excess heat can damage batteries, causing a rupture or ignition. Do not place batter

ies near fire, heat, or in direct sunlight.

Batteries contain hazardous material that may be harmful to the environment. Dis

pose used batteries sensibly. Follow local recycling guidelines for disposal of similar

material.

5.6 Smart Accessory Detection

The i5000 is equipped with smart accessory detection. If attached, the receiver automatically acquires calibration

information from the accessory and thus, allows the receiver to determine what type of accessory is present.

Metrotech accessories such as speaker or headphone audio output, host serial cable, search coils, etc. are avail

able accessory options.

5.7 Data Acquisition (Optional)

Locate data is recorded and stored in the receiver’s memory until uploaded to Metrotech’s MyLocator™ website.

Images taken from the site location and transferred to the receiver via Bluetooth can also be stored and filed with

the corresponding locate data.

The i5000 receiver has the capability of storing up to 2 MByte of recorded locate data. File size will vary, howev

er, depending upon the user’s data logging setup and standard site work order procedure for collecting the data.

Minimum file size can be as small as 100 bytes, which could be estimated to cover one month’s workload.

If a GPS antenna is installed on the i5000 receiver, locate coordinate data – latitude, longitude, and GPS clock

time are recorded as well.

Содержание MetroMark i5000 Series






























































Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Metrotech MetroMark i5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды