manualshive.com logo in svg

Metrotech MetroMark i5000 Series, Руководство по эксплуатации

Поделиться
Скачать
Metrotech MetroMark i5000 Series Скачать руководство пользователя страница 21

 

Metrotech Corp.  |  

11

Metrotech Copyright © 2008  

Doc. No.: 

R12015

 

3.3  Battery Pack

The i5000 receiver is powered by a high-capacity Li-ion rechargeable or alkaline battery pack.

See figure below.

Figure 3-8 Li-ion Battery Pack

Battery Pack Legend

a.

Battery Lock Battery Lock

b.

Recharging Receptacle

3.3.1  Recharging the Battery

The battery pack can be recharged while seated inside the receiver body. To recharge the

battery pack:

Make sure recharging of the receiver battery occurs at room temperature. Charging the battery at low and 

high ambient temperature will affect how many charge cycles the battery can withstand and might cause 

other battery damage. 

Excess heat can damage batteries, causing a rupture or ignition. Do not 

place batteries near fire, heat, or in direct sunlight.

The Li-ion battery will charge in the i5000 receiver with the unit’s power 

OFF. No light indicator confirms the battery is charging. Powering the 

unit ON will confirm the receiver battery is charging.

Attach the i5000 mains power supply to the charging jack of the Li-ion battery pack.

Plug the power supply into the electrical outlet.

The recharging time for a fully discharged battery pack is approximately 8 hrs.

The battery pack can also be recharged via the 12VDC vehicle adapter.  

Batteries contain hazardous material that may be harmful to the environ

-

ment.  Dispose used batteries sensibly.  Follow local recycling guidelines 

for disposal of similar material.  

1.

2.

3.

4.

Содержание MetroMark i5000 Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды