Metrotech MetroMark i5000 Series Скачать руководство пользователя страница 11

Страница: 11 / 62

Metrotech Corp. |

Doc. No.: R1

2015

Introduction and Safety

1.1 INTRODUCTION

The Metrotech Model i5000™ MetroMark™ is a series of state-of-the-art utility line locators precisely designed

with many powerful features to provide you with optimum information about your locate situation.

Included are a system overview, product specifications, quick start procedure for experienced users, and mainte

nance instructions.

1.2 GENERAL INFORMATION AND SAFETY

Symbols used

in this manual

Important instructions concerning the protection of staff and equipment as well as technical

safety within this document are labeled with one of the following symbols:

Symbol

Description

WARNING

Indicates a potentially hazardous situation,which, if not avoided, could result

in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury or material damage.

NOTE

Notes have important information and useful tips on the operation of your

equipment. Nonobservance may result in incorrect measurement results.

Operating

personnel

Metrotech utility line and marker locators are intended for use by utility

and contractor professionals. Safety hazards for underground utility

access areas include electrical shock, explosive gases, and toxic fumes

as well as potential influence on communications and control systems

such as traffic control and railroad crossings.

Repair and

maintenance

Repairs and service must only be done by Metrotech Corporation or

authorized service departments of Metrotech Corporation.

1.3 SAFETY PRECAUTIONS

This manual contains basic advice for the installation and operation of Metrotech Utility Line and Marker Locators

and accessories. The manufacturer is not liable for damage to material or humans due to non-observance of the

instructions and safety advice provided in this manual. Therefore, this manual should be provided and reviewed

by all personnel associated with the line locating equipment.

Содержание MetroMark i5000 Series






























































Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Metrotech MetroMark i5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание MetroMark i5000 Series

Отзывы:

Бренды по названию

Популярные бренды