DL7, DL7L
33
It is possible to connect the cable shield to the module terminal blocks. If the device is
mounted in a metal cabinet, it is recommended to connect the screen directly to the cabinet,
by passing the module connector. The screen must be connected to GND at both ends of
the cable. If there is a risk of equalizing current flowing through the screen, the screen should
be grounded on one side only (at the device).
6.2.12 OUT6RL
– six channel relay outputs module
Fig. 6.16 Wiring diagram of receivers to relay outputs of OUT6RL module.
Terminal No
Description
1
2
5
6
9
10
13
14
17
18
21
22
Relay terminal output (AC/DC)
3
4
7
8
11
12
15
16
19
20
23
24
Relay terminal output (AC/DC)
Notes:
Outputs 1 - 6 are galvanically separated.
6.2.13 OUT3
– three channel analogue outputs module
Fig. 6.17 Wiring diagram for OUT3 module.
