Metronic DL7 Series, Руководство по эксплуатации

Страница: 10 / 96

DL7, DL7L
10
2
DELIVERY CONTENT, ACCESSORIES AND STORAGE
Prior to dispatch, each Metronic AKP device is inspected and calibrated to ensure
proper and efficient operation.
CAUTION
Upon receipt, each package should be inspected for any potential damage.
The content of the whole package should be checked and the actual number of elements
should be compared with the manufacturer's list of items presented in the consecutive
subsection. In the case of damage or lack of elements, a report should be drawn up in the
presence of the carrier specifying the date of receipt and signature of the person delivering
the package.
2.1 Basic components

DL7

The DL7 Data Logger configured to individual customer's order 1 pc.

A set of plug-in type screw connection 1 set

Fixing clamp 4 pc.

Seal (assembled between case and panel) 1 pc.

Warranty Card 1 pc.

Certificate of Calibration 1 pc.
2.2 Basic components

DL7L

The DL7L Data Logger configured to individual customer's order 1 pc.

A set of plug-in type screw connection 1 set

Warranty Card 1 pc.

Certificate of Calibration 1 pc.
2.3 Storage
If the device is to be stored because it is not used for a period of time, the required
storage conditions must be observed prior to assembly. The device should be kept in
ambient temperature range from -30
°C to 70 °C at the relative humidity at 5% to 95% (non-
condensing).
Prior the installation and connecting the device to the power supply make sure that there
is no condensate water inside the device.
2.4 Accessories (optional)

CONV485E

CONV485USB-I

CONV485USB

Power supply unit

USB flash drive