DL7, DL7L
8
Warning
This product complies with the requirements of the following directives and harmonized
standards:
EMC Directive 2014/30/EC to the following standards and specifications:
For EMC immunity for industrial environments according to EN 61326-1:2013 (Table 2).
For EMC conductive and radiated emissions according to EN 61326-1:2013
Class A equipment.
The product may be exposed to interference above the limits of EN 61326 if:
The product or its wiring is located near a radio transmitter.
Excessive electrical noise occurs on the mains supply. Power line protectors (AC) should
be installed if mains supply noise is likely to happen. Protectors can combine filtering,
suppression, surge and spike arresters.
Cellular telephones and mobile radios may cause interference if used within
approximately 1 metre (39") of the product or its wiring. The actual separation distance
necessary will vary according to the surroundings of the installation and the power of the
transmitter.
Warning
This device is an Class A type instrument. In operational environment, it may cause
radio interference. In such cases, one can request to the users for appropriate measures to
avoid it.
Intended use
Check that the product is suitable for use with the application.
Determine the correct installation and physical situation.
Prior to installation of Metronic AKP products, take into account any environmental
limitations of devices, specified in the manual.
Access
Ensure safe access and if necessary a safe working platform (suitably guarded) before
attempting to work on the product.
Lighting
Ensure that there is adequate lighting, particularly where detailed or complicated work
is required.
Hazardous environment around the product
Consider: explosion risk areas, lack of oxygen (e.g. tanks or pits), dangerous or harmful
gases, extremes of temperature, hot surfaces, fire hazards (e.g. during welding), excessive
noise, moving machinery.
The system
Consider the effect on the complete system of the work proposed. Will any proposed
action put any other part of the specific system or any personnel at risk?
Dangers might include isolation of vents or protective devices or the rendering ineffective
of controls or alarms.
