background image

HOBO

®

 Pendant  

Event/Temp Data Logger 
(Part # UA-003-64) 

© 2005, 2006 Onset Computer Corporation 
Part #: MAN-UA-003, Doc #: 9831-C 

Inside this package: 

• HOBO Pendant 

Event/Temp  
Data Logger 

•  Tie wraps and 

adhesive mount 

 

Doc # 9831-C, MAN-UA-003 
Onset Computer Corporation

Thank you for purchasing a HOBO data logger. With proper care, it 
will give you years of accurate and reliable measurements. 

The HOBO Pendant Event/Temp Data Logger is a rugged, 
weatherproof event logger with a 10

-

bit temperature sensor. It is ideal 

for use with tipping-bucket rain gauges, and can record tens of 
thousands of measurements and events. The logger uses a coupler and 
optical base station with USB interface for launching and data readout 
by a computer.  

A base station, coupler, and HOBOware

®

 software are required for 

logger operation. Visit www.onsetcomp.com for compatibility 
information. 

 
Specifications 

External event input

 

Event sensor 

Two-wire interface suitable for measuring mechanical and electrical contact closures 

Maximum input frequency 

1 Hz (1 pulse per second) 

Lockout time 

500 ms 

Minimum pulse width 

1 ms (hardware debounce) 

Input/output impedance 

100 k

 

Edge detection 

Falling edge, contact closure, or Schmitt-trigger buffer 

Preferred switch type 

Normally open. For maximum battery life, the event input should be used with its preferred switch type. The 
logger will work with normally closed switches, but battery life will be compromised. 

Open circuit input voltage 

Battery voltage; nominally 3.0 V 

Maximum input voltage 

Battery v 0.3 V 

User connection 

24 AWG, 2 leads: white (+), black (

-

Temperature measurement

 

Measurement range 

-

20° to 70°C (

-

4° to 158°F) 

Accuracy 

± 0.47°C at 25°C (± 0.85°F at 77°F), see Plot A. A solar radiation shield is required for accurate temperature 
measurements in sunlight. 

Resolution 

0.10°C at 25°C (0.18°F at 77°F), see Plot A 

Drift 

Less than 0.1°C/year (0.2°F/year) 

Response time 

Airflow of 2 m/s (4.4 mph): 10 minutes, typical to 90% 

Logger

 

Time accuracy 

± 1 minute per month at 25°C (77°F), see Plot B 

Operating range 

-

20° to 70°C (

-

4° to 158°F) 

Environmental rating 

Tested to NEMA 6 and IP67; suitable for deployment outdoors 

Drop specification 

1.5 m (5 ft) onto concrete 

NIST traceable certification 

Available for temperature only at additional charge; temperature range 

-

20° to 70°C (

-

4° to 158°F) 

Battery CR

-

2032 3V lithium battery; 1 year typical use 

Memory 

64K bytes; see “Data storage” on page 3. 

Materials 

Polypropylene case; stainless steel screws; Buna

-

N o

-

ring; PVC cable insulation 

Weight 

50 g (1.7 oz.) 

Dimensions 

71 x 33 x 23 mm (2.8 x 1.3 x 0.9 inches); 1.8 m (6 ft) cable 

 

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU). 

Отзывы: