METRON QA-IDS, Руководство пользователя и обслуживания

Страница: 7 / 62

1. Introduction
This chapter describes the Metron’s QA-IDS Infusion Pump Tester’s
features and specifications.
1.1 QA-IDS Features
METRON’s QA-IDS Infusion Pump Tester is a precision instru-
ment, designed for use by trained service technicians, for testing all
types of infusion pumps according to International Electrotechnical
Commission (IEC) Draft Standard 62.D (IEC 601.2.24). Tests in-
clude:
•
volumetric tests
•
bolus tests
•
occlusion alarm tests
QA-IDS is capable of detecting a minimum volume variation of one
microliter in a range of 0.10 milliliter per hour (ml/hr) to 1000.0
ml/hr. Flow measurements are taken every 30 seconds, so that the
measurements are independent of the infusion pump’s flow rate.
Test results, shown in the QA-IDS's LCD display, can be printed out
directly, or transferred to a PC via the PRO-Soft QA-IDS test auto-
mation software. PRO-Soft lets you design test protocols, remotely
control the QA-IDS, and store the test results.
1.2 Specifications
1. Flow Rate
Flow Range 0.10 ml/hr - 1000.0 ml/hr
Min. volume detection 0.72 µl
Display resolution 0.01 ml/hr
2. Time Interval to Achieve ± % Accuracy of Reading
1000 ml/hr 100 ml/hr 10 ml/hr
0.5% 0.6 sec 0.5% 6 sec 0.5% 52 sec
1.0% 0.3 sec 1.0% 3 sec 1.0% 26 sec
1.5% 0.2 sec 1.5% 2 sec 1.5% 18 sec
3. Pressure Generation
Range: - 200 to + 600 mmHg
Accuracy:
- 200 to + 200 mmHg:
± 10 mmHg
+ 201 to + 600 mmHg: ± 20 mmHg
4. Occlusion Alarm Test
Measurement Range: - 400 to +1500 mmHg.
7