METRON QA-IDS, Руководство пользователя и обслуживания

Страница: 24 / 62

WARNING
Do not start measuring with the QA-IDS without having liquid in the
system, as it may be exposed to wear.
IMPORTANT
1.
METRON recommends sterile, distilled water in test use, as tap water
may contain too much oxygen, and potentially destructive deposits.
1. Remove all air inside the administration set before connecting it to the
QA-IDS. Air passing through the measurering system will give incorrect
readings.
1. Set up the test components. See below.
•
Connect the infusion pump being tested to the QA-IDS In-
let Port and to an infusion container.
•
Switch the QA-IDS ON . The following will be displayed in
the LCD display for about two seconds:
•
Fill the administration set with liquid (Metron recommends
distilled water).
2. Prime the QA-IDS. Before starting the measurements, the
internal volume of the QA-IDS has to be filled with liquid .
•
Connect the administration set to the inlet of the QA-IDS.
•
Press PRIME (F1) in the Main menu and the following dis-
play will appear.
24