METRON QA-IDS, Руководство пользователя и обслуживания

Страница: 27 / 62

•
Press Flow Set (F7) and enter the preset value of the infu-
sion pump being tested.
•
Press Press Set (F6) and enter in the re or - back-
pressure.
•
Press dT (F5) if values other than the default 30 seconds is
desired, and enter the new value.
2. Press MORE (F1) in Flow Measurement Setup 1 , and the
display will show the Flow Measurement Setup 2 .
The following parameters will then be displayed:
Test Time: This is the preset time for a test. Maximum testing
time is 24 hours. Default value is 1 hour.
Delay Time: This is the delay before the first measuring.
•
Press Test Time (F7) to select a time for the test other than
the default time of 1 hour.
•
Press Delay Time (F6) to set a delay before the first mea-
surement, if desired.
•
Press MORE (F1) to return to the Flow Measurement
Setup 1 Menu.
3. Press START (F2) to start flow measurement in either the
Flow Measurement Setup 1 or Flow Measurement Setup
2, and the following display will appear:
The following parameters will then be displayed:
Mean Flow: The flow of the liquid volume in infusion pump every
second, displayed in milliliters per hour (ml/h) and
percent (%).
Cum. Volume: The cumulative volume from start of the test.
Time Left: The remaining time before completion of the test.
•
Press STOP (F2) to return to the Flow Measurement 1
display.
27